Great fitment!! Looks OEM
Free worldwide shipping. $0 Tariffs on US Orders. Up to 2 week lead time on custom dashes.
makomotorsport
Couldn't load pickup availability
ADU5 Advanced Display Unit with Logging
We are proud to announce the new ECUMASTER Racing Dash family of products. We designed the ADU5 and ADU7 in response to market demand for a cost-effective dash display with logging capabilities. Our specific goal was to create a fully customizable, feature-rich, quality solution for competitive drivers. We consulted professional drivers and race engineers and designed the ADU to exceed their requirements.
Above all, the ADU is designed to display all critical information in an easy to read manner, along with a comprehensive strategy for displaying alarms.
Our Advanced Display Units are available in 5” and 7” versions. Both versions feature high resolution, high visibility anti-glare screens, guaranteeing perfect visibility in any lighting conditions. The ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practice, qualification, race, troubleshooting, etc.). Pages may be changed manually or automatically (based on defined conditions). Each channel displayed on a page (gauges, icons, texts, etc.) can be easily modified in real time using user-friendly Windows based software. Our comprehensive overlay system facilitates a multiple page display for important data (e.g. low oil pressure, best lap, etc.) independent of the actual page displayed.
The ADU is also equipped with 15 ultra-bright RGB LEDs which can be used as an advanced gear-depended shift light and can be modified by user-defined logic (for alarms, low fuel level, etc.).
Using IR beacons or a GPS system, the dash turns into a powerful lap timer with a predictive timing function. By selecting the Qualification page, you enable a “Qualification Mode” which uses advanced predictive lap timing based on an automatically updated “best” reference lap.
User configurable timers can be adjusted for additional functionality (pit stop timer, etc.). The ADU also supports thermal cameras for monitoring brake discs or tyre temperatures (up to 16 points per tyre).
Communication with other devices in the car is provided via two built-in, independent CAN-BUS communication ports. CAN templates are provided for most popular ECUs, and are fully configurable, allowing you to connect our hardware to virtually any engine management system.
To ensure that all features work seamlessly, our device is based on a 32-bit automotive controller paired with a state of the art graphics processor. This combination provides the perfect working environment for any engineer or driver and guarantees anti-aliased, high-quality graphics at 50 frames per second.
For further data analysis, data channels can be logged to a USB Flash drive with a frequency of up to 500Hz.
All of these “Must Have” features and more are housed in a rugged, specially CNC machined, black anodized enclosure.
Free, easy to install firmware upgrades further improve system capabilities (e.g. new strategies, trigger patterns, CAN data streams).
General Specifications:
Operating voltage: 6-22V, immunity to transients according to ISO 7637, with reverse polarity protection
CPU: 32 bits, automotive, 90MIPS Temperature range: -30°C to 80°C
Enclosure: Anodized aluminium, CNC machined, IP61 Connector: Automotive 36-way AMP connector
5” display: Antiglare TFT, 800x480, active area 108x64.8mm, luminance 600 cd/m2
7” display: Antiglare TFT, 800x480, active area 154.08x85.92mm, luminance 500 cd/m2
Alarms: 15 x ultrabright RGB LEDs
Communication: CAN: 2 x CAN 2.0B (250, 500, 1000 kbps) independent Serial: RS232 (Rx,Tx)
USB: Yes, for data logging (dash programming must be done via CAN, using CAN to USB adapter, Peak Pcan, or Kvaser cable)
Inputs: Analogue inputs: 8 analogue inputs, 10 bits, 500Hz, software selectable pullups/pulldowns
Digital inputs: 8 inputs with user defined sensitivity Outputs: General purpose 2 x protected 3A low side outputs
Other:
Accelerometer: 3 axis gyro and 3 axis acceleration
Light sensor: Built in for auto brightness
Temperature sensor: Built in to trace device internal temperature
Real time clock: Built in with battery backup
Features: Lap Timer: Lap timer with memory, predictive timing, triggered by a beacon or GPS
Customization: 48 available pages, user defined content, custom graphics allowed
Functions: Math channels logical functions
Overlays: Yes, user defined
CAN stream: User defined, up to 48 input messages, predefined streams for popular ECUs
Logging: Memory: USB Flash Memory Rate: Up to 500Hz per channel Real time clock: Yes
Supported ECUs
If your ECU is not listed above please send an email to tech@ecumaster.com. Our engineering team will work with you to create a configuration for your device.
Check the Application Notes page for wiring and configuration information specific to your ECU.

Overall rating: 5 / 5 from 699 reviews.
Great fitment!! Looks OEM
Jose S. 5/5 Verified
This dash is amazing for my FRS. It fits perfectly and it looks almost OEM. The FRS has a small bit of plastic that covers the very bottom of the screen but I just just adjusted the Haltech's layout with a custom design to compensate. 10/10. Excited to have this in my car!
Taylor E. 5/5 Verified
Amazing customer service! Called to confirm in stock, they shipped the same day I ordered and received within 5 days. And I’m in the US. Outstanding quality and perfect fitment! Definitely recommend!
Ronald L. 5/5 Verified
Hands down the best automotive parts customer service. Wasn't paying attention and ordered the wrong ECU for my vehicle and was able to get the proper one ordered with a simple phone call that took 2 minutes. Was informed that it would be a few weeks out but was able to get it in about a week and half. Will definitely be ordering a dash and kit when the time comes.
Joshua R. 5/5 Verified
Came out great supper strong 💪 and will not break on you.
John D. 5/5 Verified
very well made, fit without any modifications to any of the related components. Well worth every dime!! The only thing that could make it any better , would be to include some clips and screws for the two top mounting tabs for installation. factory screws worked for the two lower mounting tabs, but I had to source some speed clips and appropriate length screws to complete the installation. As you can see, the aftermarket gauges fit beautifully into the panel, and should be a great upgrade from the factory set up for the 5.3 LS conversion I'm doing on my 1988 Toyota 4-Runner. Thank you for such a great product, and for the really fast shipping!!! I'll be sharing these results on some Facebook groups that are following my build. I'm sure there are going to be some follower interested in your products.
Dennis R. 5/5 Verified
UC-10 cluster mount fit great in my DC2 integra thank you Mako Motorsport!!!
Zack S. 5/5 Verified
Haltech uC-10 uC10 Dash Cluster Mount (display sold separately)
Great fit easy install
Jamal R. 5/5 Verified
Top quality and fits lovely
Wezzy 1. 5/5 Verified
Love the looks the fitment its awesome wish i had other vehicles to put it in.
Burke L. 5/5 Verified
Fast shipping thanks.
Jeff M. 5/5 Verified
Dash holder was great
Dancan B. 5/5 Verified
Excellent quality, good precision. Fast shipping
Luis M. 5/5 Verified
Fit really well. This was the only UC 10 mount that I could find for my 89 CRX SI. The UC 10 is a little large and cuts off the bottom of the screen but not bad.
Ryan J. 5/5 Verified
Honda Civic 4th Generation ED EF EC EE EX / Honda CR-X 88-89 Dash Mounts
To find a company that produces parts for my generation civic was awesome. To have it be as high quality as it is, icing on the cake. Couldn’t be happier!
Preston V. 5/5 Verified
Solid, well finished pieces & the most important is superb fitment for my digital dash & impreza dash.
Hasrol Y. 5/5 Verified
Top niquel
Antonio Carvalho C. 4/5 Verified
Fits perfectly!!
Brock H. 5/5 Verified
I purchased an E30 instrument cluster mount from Mako motorsport for the uC-10 digital dash. When I received the item initially the quality of the product surprised me. I didn't expect it to look so good. The test fit in the dash was perfect and when the digital instrument cluster from Haltech was installed, it was breathtaking. Well done. Mako motorsport.
Ky L. 5/5 Verified
Thank you for all you are amazing!
Andreas K. 5/5 Verified
Finally, a mounting solution that positions the screen exactly where it needs to be. The recessed design keeps the display at a perfect viewing angle through the steering wheel and doesn't sit too high. Installation was straightforward and the build quality is solid. Perfect for anyone running a Nexus or Elite setup who wants a seamless install.
Alex M. 5/5 Verified
Item looks great and fits great in the vehicle!
Sebastian M. 5/5 Verified
perfect fit !!!!!!
Leo H. 5/5 Verified
Dash cluster fits great and is good quality would definitely recommend!
Thomas C. 5/5 Verified
This is my second dash I've bought from mako, just upgraded to a Haltech so I had to get another! They aren't cheap but the quality and fit is second to none, absolutely love it
Caleb C. 5/5 Verified
Think you!This is a very good product!Thanks to this, we were able to create a very cool meter!
悠輔 坂. 5/5 Verified
Fit the Haltech great.
Adam D. 5/5 Verified
It fit perfectly. Thank you Mako Motorsports
Juan P. 5/5 Verified
Awesome product, definitely the best dash mount out there
Darryl C. 5/5 Verified
Works perfectly on my s2000! A little more angled than I’d like but still works well
Guillermo G. 5/5 Verified
شكراً على سرعه الاستجابة وانه افظل منج تم تصنيعه بديل لشاشة gtr34
مطر محمد ا. 5/5 Verified
This is such a great fit! I love the look. Only had to trim a little off the hood but other than that it fit like a glove!
Guy S. 5/5 Verified
Thank you mako motorsport for the haltech ic7 dash mount for my 97 eagle talon looks amazing as ever mako motorsport is # 1.
Ismir J. 5/5 Verified
Mitsubishi Eclipse / DSM Eagle Talon 2nd Gen 95-99 Dash Mount
Super helpful amd fast shipping
Jonathan C. 5/5 Verified
Added blinkers looks great mic better than other low quality 3d printed bezels
Joseph D. 5/5 Verified
Grear finished, perfect fitment
Julien G. 5/5 Verified
Sadly Haltech was short inventory during my order time - however very happy with the product between my uc10 dash and the seamless integration with the Mako Motorsport cluster mount for it in my GC8 STi looks great! Highly recommended which led to my purchase and I'm now recommending the same to others! High quality; looking forward to my car running under its own power to truly be able to use this!
Ronnie S. 5/5 Verified
Perfect fitment. No adjustments needed to attach fuel tech or nano pro. Fits like a glove!
Jayson C. 5/5 Verified
Fit in the e36 M3 dash was excellent and makes a nice mounting place for the AiM MXP. Side button (can be an issue on some other brand mounts) are easy to access.
Clyde H. 5/5 Verified
Fitment is spot on. Love how it came out.
Sultan A. 5/5 Verified