Link ECU - Link MXG Strada 7" Dash - Street Edition
Link MXG Strada 7” dash, powered by AIM.
The Link MXG Strada Street edition is a full colour, 7-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to work with all Link G4+/G4X Wire-In and Plug-in ECU's. See features tab for more information.
This listing is for the 'Street edition', please see the 'Race edition' if you are looking for a dash for motorsport purposes.
The Strada dash is also available in 5” (MXS) and 10” (MXT) versions.
The Link MXG Strada Street Edition dash features customisable shift lights, six street icons and a high contrast 7” TFT screen display. Visual quality is always optimal as the ambient light sensor auto-adjusts the brightness of the display.
The 10 multi-coloured RGB shift lights on the MXS Strada can be customised to your liking to define the RPM threshold for each single gear. There are also 8 Street Icons located to the side of the screen. These include an indicator lights, headlight, high beam, check engine, oil pressure warning light, temperature warning light and fuel light.
The dash is extremely easy to use, with buttons on the side to navigate through a library of preset display styles, depending on what information you want to see and in what layout. The screen can display all real-time information reading from the ECU such as RPM, speed, water temperature, oil pressure and much more.
The Link MXG connects directly to your Link ECU via the pin kit and wiring provided in the box. To use with plugin ECU’s - CANPCB and CANF connectors will be required (Purchased separately).
The dash can be personalised via Link ECU PC Link and Aim Technologies Race Studio 3 software.
Included in the box: Link MXG 1.2 Strada USB cable 14 pin standard wiring 23 pin connector + contacts
GPS module available separately.
Power consumption: 400 mA Dash Dimensions: 237×127.6×26 mm Weight: 950 g Waterproof: IP65
The install went smoothly, some trimming of the dash plastic was required but overall not bad. There is a HVAC vent directly above where the uc10 sits, there’s a guy on YouTube saying the uc10 won’t fit unless it’s removed but as you can see in the pictures I was able to install the uc10 with your mount and retain my HVAC vent. It’s a very tight fit and you need to “walk” the dash in, instead of just pushing it down the dashboard opening. Once it’s in place everything lines up to factory mounting points and you can install the OEM hardware. Dash sits very nicely and flush.
This dash is amazing for my FRS. It fits perfectly and it looks almost OEM. The FRS has a small bit of plastic that covers the very bottom of the screen but I just just adjusted the Haltech's layout with a custom design to compensate. 10/10. Excited to have this in my car!
Amazing customer service! Called to confirm in stock, they shipped the same day I ordered and received within 5 days. And I’m in the US. Outstanding quality and perfect fitment! Definitely recommend!
Hands down the best automotive parts customer service. Wasn't paying attention and ordered the wrong ECU for my vehicle and was able to get the proper one ordered with a simple phone call that took 2 minutes. Was informed that it would be a few weeks out but was able to get it in about a week and half. Will definitely be ordering a dash and kit when the time comes.
very well made, fit without any modifications to any of the related components. Well worth every dime!!
The only thing that could make it any better , would be to include some clips and screws for the two top mounting tabs for installation. factory screws worked for the two lower mounting tabs, but I had to source some speed clips and appropriate length screws to complete the installation. As you can see, the aftermarket gauges fit beautifully into the panel, and should be a great upgrade from the factory set up for the 5.3 LS conversion I'm doing on my 1988 Toyota 4-Runner.
Thank you for such a great product, and for the really fast shipping!!!
I'll be sharing these results on some Facebook groups that are following my build. I'm sure there are going to be some follower interested in your products.
Fit really well. This was the only UC 10 mount that I could find for my 89 CRX SI. The UC 10 is a little large and cuts off the bottom of the screen but not bad.
To find a company that produces parts for my generation civic was awesome. To have it be as high quality as it is, icing on the cake. Couldn’t be happier!
I purchased an E30 instrument cluster mount from Mako motorsport for the uC-10 digital dash. When I received the item initially the quality of the product surprised me. I didn't expect it to look so good. The test fit in the dash was perfect and when the digital instrument cluster from Haltech was installed, it was breathtaking. Well done. Mako motorsport.
Finally, a mounting solution that positions the screen exactly where it needs to be. The recessed design keeps the display at a perfect viewing angle through the steering wheel and doesn't sit too high. Installation was straightforward and the build quality is solid. Perfect for anyone running a Nexus or Elite setup who wants a seamless install.
This is my second dash I've bought from mako, just upgraded to a Haltech so I had to get another! They aren't cheap but the quality and fit is second to none, absolutely love it
Sadly Haltech was short inventory during my order time - however very happy with the product between my uc10 dash and the seamless integration with the Mako Motorsport cluster mount for it in my GC8 STi looks great! Highly recommended which led to my purchase and I'm now recommending the same to others! High quality; looking forward to my car running under its own power to truly be able to use this!
Fit in the e36 M3 dash was excellent and makes a nice mounting place for the AiM MXP. Side button (can be an issue on some other brand mounts) are easy to access.
